非迁移潮作用下的电离层赤道异常区单峰现象及其经度分布          下载免费PDF全文

田耀宇  郝永强  张东和  肖佐 《地球物理学报》2019,62(11):4067-4081

当喷泉效应较弱而双峰结构发展不充分的时候，可能在赤道异常区仅能够观测到一个电子密度的峰值，称之为单峰现象.本文利用CHAllenging Minisatellite Payload卫星在2001-2010年的电子密度数据给出了单峰的发生规律，单峰在地方时早上08：00-10：00和下午16：00-19：00发生率高，发生位置在经度上呈现多波数分布，尤其在10：00-18：00明显：在分季时多呈现四波，而在冬至季时以三波为主.单峰发生多的经度，正好对应着双峰的结构特征较弱之处.究其原因，是非迁移潮的DE2和DE3分量调制了背景风场和大气发电机电场，在电场和喷泉效应减弱的经度，双峰结构难以形成时，就会表现为单峰结构.本文扩展了对单峰现象的地方时、季节和经度分布等规律的了解，明确了非迁移潮在其中施加的影响，由此，单峰同双峰现象一样可以用于研究非迁移潮对热层-电离层的作用.  相似文献   

Hydrodynamic performance of a T-shaped floating breakwater     

《Applied Ocean Research》2019

The comprehensive utilization of floating breakwaters, specially acting as a supporting structure for offshore marine renewable energy explorations, has received more and more attention recently. Based on linear water-wave theory, the hydrodynamic performance of a T-shaped floating breakwater is semi-analytically investigated through the matched eigenfunction expansion method (MEEM). Auxiliary functions, to speed up the convergence and improve the accuracy in the numerical computations, are introduced to represent the singular behavior of fluid field near the lower salient corners of the structure. The effects of the height and installation position of the vertical screen on the reflection and transmission coefficients, dynamic response and wave forces are examined. It is found that the presence of the screen shifts the resonance frequency of RAO for both surge and pitch modes to the low-frequency area, while has no effect on heave mode. The identical added masses, damping and transmission coefficients can be obtained in the cases where the screen holds the same distance away from the longitudinal central axis of the upper box-type structure. Moreover, a relatively small pitch response can be achieved in a wide wave–frequency range, when the breakwater is Γ-shaped.  相似文献   

太行山南端浅层速度结构成像和隐伏断裂探测   总被引：1，自引：0，他引：1  

徐增波  刘保金  姬计法  鄷少英  袁洪克  谭雅丽  王宏伟 《大地测量与地球动力学》2019,39(1):88-92

利用太行山南端的深地震反射剖面数据，运用初至波层析成像方法反演得到该区域的浅层P波速度结构和基底面展布形态，发现剖面浅部的P波速度变化与沉积盖层厚度和断裂分布有着较好的对应关系。利用跨断裂完成的浅层地震反射剖面，对区域内2条第四纪隐伏活动断裂进行高分辨率成像。结果表明，汤西断裂为东倾的正断层，控制汤阴地堑的西边界，活动年代为中更新世；汤东断裂为西倾的正断层，是汤阴地堑的主控边界断裂，活动年代为晚更新世。  相似文献   

浮游植物metacaspase的分布、结构及其功能特性     

苏金净  蔡伟聪  李桂玲  李健  曾珺  刘静雯 《海洋与湖沼》2019,50(5):1059-1069

精氨酸/赖氨酸特异性半胱氨酸蛋白酶(Metacaspase)在浮游植物程序性细胞死亡(programmed cell death.PCD)过程中起着关键作用。本文利用生物信息学方法分析metacaspase基因在浮游植物中的分布,并以海洋球石藻(Emilianiahuxleyi)metacaspases(EhMCs)为代表分析其结构和功能,依据Uniprot和String数据库挖掘与metacaspase功能相关并参与浮游植物PCD过程的互作蛋白。结果发现:共计29条、四种类型的metacaspases分布于11种浮游植物中,它们的metacaspase蛋白一级结构存在明显差异,但位于p20的组氨酸和半胱氨酸活性位点均具有高度的保守性;EhMCs三级结构与酵母的metacaspase十分相似,暗示它们具有类似的功能;浮游植物metacaspases与多种蛋白存在直接或间接的互作关系,在细胞PCD过程、响应环境胁迫和能量代谢等方面发挥重要作用。另外.metacaspase的磷酸化修饰可能在浮游植物PCD信号转导过程中起调节作用。  相似文献   

时间尺度重构EEMD-GRNN改进模型预测PM2.5的研究     

符海月  张祎婷 《地球信息科学学报》2019,21(7):1132-1142

合理构建PM_2.5浓度预测模型是科学、准确地预测PM_2.5浓度变化的关键。传统PM_2.5预测EEMD-GRNN模型具有较好的预测精度,但是存在过于关注研究数据本身而忽略其物理意义的不足。本研究基于南京市2014-2017年PM_2.5浓度时间序列数据,分析PM_2.5浓度多尺度变化特征及其对气象因子和大气污染因子的尺度响应,基于时间尺度重构进行EEMD-GRNN模型的改进与实证研究。南京市样本数据PM_2.5浓度变化表现为明显的天际尺度和月际尺度,从重构尺度（天际、月际）构建GRNN模型更具有现实意义;同时,PM_2.5对PM₁₀、NO₂、O₃、RH、MinT等因子存在多尺度响应效应,以其作为GRNN模型中的输入变量更具有时间序列上的解释意义。改进后的EEMD-GRNN模型具有更高的PM_2.5浓度预测精度,MAE、MAPE、RMSE和R²分别为6.17、18.41%、8.32和0.95,而传统EEMD-GRNN模型的模型有效性检验结果分别为8.37、27.56%、11.56、0.91。对于高浓度天（PM_2.5浓度大于100 μg/m³）的预测,改进模型更是全面优于传统EEMD-GRNN模型,MAPE为12.02%,相较于传统模型提高了9.03%。  相似文献   

可可西里岩石圈向北俯冲到柴达木地幔的地震学证据          下载免费PDF全文

赵荣涛  赵文津  史大年  刘志伟  杨艳 《地球物理学报》2020,63(8):2940-2953

利用中美德INDEPTH IV合作项目2007—2009年间布置于青藏高原中、北部140个宽频地震台站记录到的天然地震数据,经过接收函数成像处理,获得了3条穿过昆仑—阿尼玛卿缝合带清晰的壳幔结构图像.结果显示柴达木南缘莫霍面位于约50 km深度,羌塘地块、可可西里地块、东昆仑造山带莫霍面位于约65 km深度,昆仑—阿尼玛卿缝合带以北约50 km存在莫霍面深度突变.在可可西里和柴达木岩石圈地幔之间观测到北倾界面,这可能是可可西里岩石圈向北俯冲到柴达木地幔之下的证据.可可西里地块地壳内宽缓的负转换震相带是低速带的反映,其向北挤入到东昆仑山下发生挤压增厚,可能是东昆仑山隆升的原因;由于刚性柴达木岩石圈的阻挡,物质向东改向,则可能是该地区向东旋转的构造应力场产生的原因.本文研究结果不支持亚洲岩石圈地幔在东昆仑—柴达木交界处向南俯冲,据此,我们提出了新的东昆仑造山模式.  相似文献   

Numerical homogenization-based seismic assessment of an English-bond masonry prototype: Structural level application     

Luís C. Silva  Paulo B. Lourenço  Gabriele Milani 《地震工程与结构动力学》2020,49(9):841-862

A multiscale strategy is evaluated at a structural level for the analysis of unreinforced masonry structures. The mechanical characterization of the masonry is deduced from homogenization-based micro-scale finite element (FE) models. The derived data are here employed at a structural level via a discrete FE model. The discrete FE model is composed of quadrilateral rigid plates interconnected through vertical and horizontal interfaces. On the interfaces, between adjoining discrete elements, a model that accounts for the in- and out-of-plane behavior of masonry, with damage and plasticity, is adopted. Such interfaces represent the material pre- and post-peak regimes, its orthotropy, and, depending on the micro-model assumed, account by three-dimensional shear effects that are especially important for multi-leaf walls and complex regular textures. The discrete model has been implemented in an advanced structural analysis software where powerful built-in features as the arc-length method, line-search algorithm, and implicit or explicit solver schemes are available. The multi-scale model is applied for the dynamic study of a small English-bond masonry house prototype subjected to a series of consecutive earthquake records. Detailed comparisons between the experimental and numerical data are presented, including the results obtained through a continuous total strain rotating crack model. Quasi-static and dynamic analyses are conducted. Results demonstrate that when enough experimental information is available on the masonry components under tension, shear, and compression regimes, the approach predicts well the seismic structural response in terms of time-history displacements, seismic capacity, and damage patterns. The required computational cost (CPU time) is very attractive.  相似文献   

Debris-flow-dominated sediment transport through a channel network after wildfire     

Petter Nyman  Walter A.C. Box  Justin C. Stout  Gary J. Sheridan  Saskia D. Keesstra  Patrick N.J. Lane  Christoph Langhans 《地球表面变化过程与地形》2020,45(5):1155-1167

Field studies that investigate sediment transport between debris-flow-producing headwaters and rivers are uncommon, particularly in forested settings, where debris flows are infrequent and opportunities for collecting data are limited. This study quantifies the volume and composition of sediment deposited in the arterial channel network of a 14-km² catchment (Washington Creek) that connects small, burned and debris-flow-producing headwaters (<1 km²) with the Ovens River in SE Australia. We construct a sediment budget by combining new data on deposition with a sediment delivery model for post-fire debris flows. Data on deposits were plotted alongside the slope–area curve to examine links between processes, catchment morphometry and geomorphic process domains. The results show that large deposits are concentrated in the proximity of three major channel junctions, which correspond to breaks in channel slope. Hyperconcentrated flows are more prominent towards the catchment outlet, where the slope–area curve indicates a transition from debris flow to fluvial domains. This shift corresponds to a change in efficiency of the flow, determined from the ratio of median grain size to channel slope. Our sediment budget suggests a total sediment efflux from Washington Creek catchment of 61 × 10³ m³. There are similar contributions from hillslopes (43 ± 14 × 10³ m³), first to third stream order channel (35 ± 12 × 10³ m³) and the arterial fourth to fifth stream order channel (31 ± 17 × 10³ m³) to the total volume of erosion. Deposition (39 ± 17 × 10³ m³) within the arterial channel was higher than erosion (31 ± 17 × 10³ m³), which means a net sediment gain of about 8 × 10³ m³ in the arterial channel. The ratio of total deposition to total erosion was 0.44. For fines <63 μm, this ratio was much smaller (0.11), which means that fines are preferentially exported. This has important implications for suspended sediment and water quality in downstream rivers. © 2019 John Wiley & Sons, Ltd.  相似文献   

Surficial fractures in the Navajo sandstone,south-western USA: the roles of thermal cycles,rainstorms, granular disintegration,and iterative cracking     

David B. Loope  Garrison R. Loope  Caroline M. Burberry  Clinton M. Rowe  Gerald C. Bryant 《地球表面变化过程与地形》2020,45(9):2063-2077

Deep (> 5 m) sheeting fractures in the Navajo sandstone are evident at numerous sites in southern Utah and derive from tectonic stresses. Strong diurnal thermal cycles are, however, the likely triggers for shallow (< 0.3 m) sheeting fractures. Data from subsurface thermal sensors reveal that large temperature differences between sensors at 2 and 15 cm depth on clear summer afternoons are as great as those that trigger sheeting fractures in exposed California granite. Extensive polygonal patterns in the Navajo sandstone are composed of surface-perpendicular fractures and were produced by contractile stresses. Numerous studies have shown that porewater diminishes the tensile strength of sandstone. Based on our thermal records, we propose that cooling during monsoonal rainstorms triggers polygonal fracturing of temporarily weakened rock. On steep outcrops, polygonal patterns are rectilinear and orthogonal, with T-vertices. Lower-angle slopes host hexagonal patterns (defined by the dominance of Y-vertices). Intermediate patterns with rectangles and hexagons of similar scale are common. We posit that outcropping fractures are advancing downward by iterative steps, and that hexagons on sandstone surfaces (like prismatic columns of basalt) have evolved from ancestral orthogonal polygons of similar scale. In lava flows, fractures elongate intermittently as they follow a steep thermal gradient (the source of stress) as it rapidly moves through the rock mass. In our model, a steep, surficial thermal gradient descends through unfractured sandstone, but at the slow pace of granular disintegration. Through time, as the friable rock on stable slopes erodes, iterative cracking advances into new space. Hexagonal patterns form as new fractures, imperfectly guided by the older ones, propagate in new directions, and vertices drift into a configuration that minimizes the ratio of fracture length to polygon area. © 2020 John Wiley & Sons, Ltd.  相似文献   

国产高分辨率遥感影像农村公路核查方法及其应用     

蔡红玥  袁胜古  阳柯  王芳  盛光晓 《测绘通报》2020,(3):91-95

传统的农村公路核查需要人工实地抽查或通过GNSS设备进行信息采集验核，存在成本高、效率低等问题。遥感影像具有成像范围广、时效性高、成本低、能客观反映现实情况等优点。相比于传统方法，将遥感影像引入农村公路核查，能客观、准确、高效地对农村公路相关信息进行核查。本文基于国产高分辨率遥感影像，结合农村公路遥感核查业务，采用遥感影像道路提取算法，设计并实现了一种农村公路核查方法。将本方法应用于某中部省份农村公路遥感核查业务，实际应用表明该方法能有效提高现有农村公路遥感核查的工作效率。  相似文献